Our Mission
K-Audio Pro was built on a single conviction: professional audio equipment should be engineered to perform at the level the stage demands, not the level a budget allows. Every product in the K-Audio Pro catalogue — from the LA Series line arrays and FP Series passive speakers to the URX wireless microphone systems and SXA conference units — is designed by acoustic engineers who understand what it means when a system fails mid-show or a conference chairman cannot be heard.
Italian acoustic engineering forms the foundation of K-Audio Pro's design philosophy. Italy's history as the birthplace of formal acoustic science gives the brand a depth of reference that informs everything from driver selection and cabinet geometry to amplifier topology and conference system architecture. K-Audio Pro brings that heritage to professional audio systems deployed across arenas, concert touring productions, houses of worship, government chambers, and corporate headquarters worldwide.
Engineering Expertise
LA Series touring line arrays engineered for controlled directivity, consistent SPL across 40-metre-plus throw distances, and arena-scale SPL with matched Sub Stack subwoofer configurations. Designed for concert touring, outdoor festivals, and permanent arena installation.
FP Series passive full-range cabinets from 10-inch to 15-inch driver configurations, and FPE Series active subwoofers — built for live touring, fixed installation, and portable PA applications requiring professional-grade sound reinforcement.
LA2200 and LA4400 Class-D touring amplifiers providing 2200W and 4400W respectively. High efficiency, minimal heat generation, and the current headroom required to drive large passive speaker loads without clipping under full programme material.
PMR Series powered and unpowered mixing consoles from 6 to 16 channels. Built-in DSP processing, balanced XLR inputs, and the signal integrity required for professional live sound mixing in both portable event rigs and installed sound environments.
URX Series UHF wireless systems with automatic frequency scanning for interference-free operation in congested RF environments. CDM Series wired dynamic microphones for applications where maximum reliability and lowest noise floor are non-negotiable.
SXA wired and SXW wireless conference units for boardrooms, government chambers, and large multi-delegate facilities. Automatic microphone management, integration with recording and interpretation systems, and configurations scaling from 4 to 120+ delegate positions.
Deployed In
Product Range
Touring line array modules, sub stacks, and rigging hardware for arena-scale productions.
Explore Line ArraysPassive full-range cabinets from 10″ to 15″ and active subwoofers for live sound applications.
Explore SpeakersHigh-efficiency Class-D touring amplifiers from 2200W to 4400W output power.
Explore AmplifiersPowered and unpowered mixing consoles from 6 to 16 channels with onboard DSP.
Explore MixersUHF wireless systems and wired dynamic microphones for live performance and broadcast.
Explore MicrophonesWired and wireless delegate conference units for boardrooms and government chambers.
Explore ConferenceEngineering Principles
Every cabinet geometry, crossover point, and driver specification is derived from acoustic modelling rather than cost optimisation. Performance measurements are taken in anechoic conditions and verified in real-world installations before production release.
Professional audio equipment must perform in hostile environments — high temperatures, vibration, humidity, and the unforgiving schedule of a touring production. K-Audio Pro products are stress-tested to exceed the conditions of professional touring use.
Line arrays, amplifiers, speakers, mixers, microphones, and conference systems within the K-Audio Pro range are designed as a unified ecosystem. Electrical characteristics, signal levels, and mechanical interfaces are matched across product lines for clean, predictable integration.
K-Audio Pro provides technical documentation, acoustic design consultation, and after-sales support for every product. System design assistance — including speaker placement modelling and amplifier sizing — is available to all customers as part of the enquiry process.
Work With Us
Send your venue dimensions, application, and equipment requirements. Our engineers will deliver a complete system specification and quote within 24 hours.